This section is just a carved up version of the old quickstart document. It is not yet updated for Kdenlive 0.7.4+
Now that you are familiar with the screen sections and buttons, it's time to create the basic configuration for a new project, add pieces of sound and video to it, move these pieces around, apply effects and transitions and so on ...
In this tutorial, we'll work with two clips, adding a title at the beginning, a video transition between them and a video effect to a part of one clip. Finally, we'll render the project to DVD, ready for TV playback.
Step one is to get some clips into Kdenlive. This could be footage downloaded from YouTube, or material captured from a video camera or TV-capture-device. Let's assume that you already have some files available that are supported by Kdenlive.
To add a clip, select the Project Tree panel, drag the "Add Clip" dropdown button, and select "Add Clip". This brings up a KDE open dialog. Select one or more clips, and they will be added to the project tree. They are now displayed in the Project Tree panel with some metadata.
Kdenlive is able to create simple titles as described here. We can also work with external image editors (like GIMP) to create more sophisticated titles and then add them to the project list as video clips.
To create a title clip, select "Add clip" icon () and, in the context menu, select "Create Text Clip". A new window like this will be presented:
In this window, you can give a name to your clip, define the duration, the letter type, size and colour. You'll also have the following icons:
You can now select the "Enter text" icon, write the title and click "OK". The text will appear in the window and you can drag and drop it wherever you want on the screen. To improve your title, click the "Draw box" icon and, with the left mouse button pressed, draw a box on the screen. Before doing so, you need to change the box colour in the same way as you did for the text. If the box and the text have the same colour, they may interfere!
Don't worry if you can't see your text now! Select the box and try with the "Bring to front/send back" icons. Better now, huh?
By dragging and dropping the box and the text and by playing with the movement icons, you can obtain quite nice titles!
Now that you have some clips in your project, it is time to start editing them together into your dream video. There are two basic ways to add a clip to the timeline.
You can drag a clip directly from the project list. Select one of the clips that you have added to the project list, and drag it to the timeline. As soon as the mouse reaches a track, the clip will appear on the track. With this kind of drag, the entire duration of the clip is placed on the timeline. You can then edit the clip from the timeline.
The other way is to select a segment of a clip and then add this segment to the timeline. When you click on a clip in the project list, the Clip Monitor will automatically load the clip. You can then press Play on the Clip Monitor and get an idea of which bits of the clip you actually want on the timeline. Then, position the seek marker () to where you want your clip to start and click the "inpoint" button (). Move the cursor to where you want the clip to end, and click the "outpoint" button (). Finally, you can move this cut-down clip to the timeline by clicking the video screen on the Clip Monitor and, holding down the left mouse button, placing it in the desired point of the timeline. The selected zone between the in and out point will then appear there as a clip (to be more precise, a subclip as we've selected only a part of the original clip).
Choose your way and, to continue with the quickstart guide, be sure to move two clips (or subclips) to the timeline. One to Track #1 and the other to Track #2.
Moving the selected clips around on the timeline is as simple as clicking on them with the left mouse button and dragging them around. You can resize clips directly from the timeline. Simply move the mouse cursor to the beginning or end of the clip you want to resize. Now, click and drag with the left mouse button to resize the clip.
Resizing a clip changes its in and out points. If you reselect the clip and look in the clip monitor, you will see that the in and out points on the monitor show the new positions. It is not possible to resize an audio or video clip past their length - if a clip is 30 seconds in length, then you will not be able to resize the clip so that it finishes playing 35 seconds into the clip! -. On the other hand, you can resize text, image or color clips to increase or reduce their length as you want.
When you are resizing and moving clips, there is a handy "snap to" feature, which will snap the edges of clips to other clips and the current seek position. This is useful for quickly lining clips up with each other, but in some cases may not be what you want. You can turn this behaviour on and off using the "Snap to" icons:
There are some ways to remove a clip from the timeline. Maybe the easier one is to select the clip or clips that you want to delete, and press the "Delete" button in your keyboard.
Another way is to select the clips that you want to delete, press the right mouse button and in the context menu select option Delete Clip.
By this, you'll remove the clip from the timeline but it still appears in the "Project Tree" list. If you select the clip here and proceed as above, you'll remove it also from the project. But do not worry, it still remains physically in your disk!
Sometimes you may need to delete (maybe because you let your video-camera or TV-capture-device run too long) or maybe to apply a video effect to only a part of a clip. Kdenlive allows you to do so by splitting the original clip.
To split a clip, the normal way is to place the timeline cursor at the splitting point (you can adjust the exact position by playing with the "Next frame" and "Previous frame" buttons in the "Timeline Monitor"). Then press the right mouse button and in the context menu select option Razor Clip. (The razor cuts before the current frame, so the right strip will contain the frame you're standing on.) With this option only the clip in the current track will be split.
You can split all clips at that position selecting the option Razor All Clips in the edit menu.
We are going now to add a transition between two clips. Transitions are normally used to smoothly change from one clip to another (or from one scene to another). Some transitions can be used also as video effects (Picture in Picture, for example). These powerful features are explained in detail in this page, but for the purpose of this quickstart guide, we'll focus on an easy one, the crossfade transition (but see the warning at the top of this page!)
Before start, be sure that you have your two videoclips in tracks #1 and #2. Also, move (as explained before) the title clip that we've created previously to the start of track #0.
If we want to apply a transition, we need to overlap the required clips in different tracks. So first thing to do is to move the clip in track #1 to overlap with the title in track #0, let say by 2 seconds.
To better control this overlap you can change the timeline zoom using the viewer tool . Click on the magnifying glass and select a small scale or click on the ruler and drag left.
Once done, click on the title clip and press the right mouse button. In the context menu select Add transition -> Crossfade. A yellow bar will appear between the clips in tracks #0 and #1 indicating your transition has been added to the project.
At this point your screen should look like this one:
To have a real time view of how your transition works, you can click the seek marker and drag it over the transition area. If everything is OK, you should see in the "Timeline Monitor" how the title clip dissapears at the same time the video clip is displayed.
To edit a transition and change parameters, you can double click on it (the yellow bar). In this way, it will become red and the focus in the "Project Panel" will change to the "Transition tab". In this tab you'll be able to change the transition parameters if needed.
As the Crossfade is an easy transition, the only parameters you can change are the transition direction and the track where it applies.
If the Invert direction parameter is selected, the upper track clip is shown first and the transition is applied until the view changes to the lower track clip. If the parameter is not selected, then the direction is the other way round.
The track to apply the transition is normally the next track after the one where we created the transition. But you can change this behaviour by selecting others in the Track Selection List. This is a powerful feature for advanced transitions, but for the moment we'll not use, so be sure your selection is Automatic – Use next video track.
You can play now creating a new transition between clips in tracks #1 and #2 in the same way as explained above.
Now you know how to create a transition between clips, is time to experiment with another feature in Kdenlive: The effects.
Effects are ways to change your original clip. Kdenlive comes with different effects that can be applied to the audio and others that can be applied to the video. The small number of standard audio effects can be easily increased if you use the Ladspa plug-ins (see this page to know how to load them).
To know in detail all effects and how they works, you can have a look at this page.
In this guide we'll know how to apply a "Greyscale" effect to a clip. This effect, as the name indicates, will take out colors from the video and display it in black & white (well, really using black, white and different grey tones! ).
Normally, except some of them, the effects apply to a full clip so, if you want to limit the effect to just a part, you need to create "subclips" as explained before in this page.
So let's go to clip in track #2. Select it and click the right mouse button. In the context menu select Add Video Effect -> Greyscale. You'll see immediatly how the colours in your clip dissapear and are replaced by grey tones!
In the same way as transitions, you can also edit the effect parameters. To do so, select the "Effect Stack" tab in the Project Panel. Unfortunately, the Greyscale effect is so easy that has no parameters!
But in this tab, you can also find some useful icons to organize the effects:
You can see also that behind the effect name there's a checkbox. If you uncheck it, the effect will not be applied but still remains in the effect list with the selected parameters (if any!). This is useful if you want to use it later on.
And behind the "Parameters" tab, you'll notice another one titled "Keyframes". For some effects, you can select as many keyframes as you need in the clip and for each keyframe you can define different parameters. This is useful if you want, for example, mute a part of a clip. You can do so in two ways:
- Creating a subclip and applying the "Mute" audio effect to this subclip
- Or using the "Volume" effect. This can be applied to the full clip and, by defining different keyframes you can adjust the volume, for example, to start muted, then increase progressively, then continue at normal level, then decrease progressively and become muted, continue muted for a time and start again progressively ...
To know more about keyframes and how to work with them see this page
At this point we are ready to render our project and see how it looks on our TV, PC, ... If you've followed the steps until now, your screen should look like this one:
You have a title clip in track #0 with a crossfade transition between it and the other clip in track #1. Another transition (this one made by you!) between this clip and the one in track #2 and a greyscale effect applied to this clip.
Now follow some steps to create a DVD with this project. With Kdenlive you'll be able to easily create a DVD video structure and burn it (if you have installed the program k3b). You will also add a simple menu with chapters and even with an intro movie if you like.
To create a DVD video, you can follow these steps:
- Select the menu option Render -> Export to DVD. - You'll be presented with a window to enter export details:
- In this screen you should enter the folder name where the DVD structure should be created and the DVD format (PAL/NTSC). Be sure that the option "Render file now" is selected.
As you can see, in this screen it's also possible to define the DVD chapters and also to create the DVD from an existing video file (.VOB), but for the moment we are not going to use these options. For further details see this page.
- Press the "Next" button. In the following dialog you can select to create a DVD menu or not. If you want to, check the "Create Menu" option and the rest of the data will be accessible.
You can choose to use a plain colored screen for your menu (click on the color box to select it), an image file or even a movie file (enter the path and name if selected). Also, you can define a pause between chapters if you have created such.
In the "Buttons" tab you can define the title text, font and size and the different colors for the button depending on status (not selected, selected, pressed).
In the "Intro" tab you can indicate a video file to be presented before the menu appears in the screen (like an introduction video).
- When you've entered data, press again the "Next" button. Kdenlive is now ready to generate the DVD using the program DvdAuthor. Click on "Generate DVD" to do so.
A message will appear telling you to continue working while the video is generated. You can see progress in the "Status Bar".
When the process is finished, you may choose to work with the generated DVD externally (you'll find the Audio & Video directories in the specified path) or return again to this screen by selecting menu option Render -> Export to DVD. If you decided to go on with Kdenlive, you'll have options to directly burn your video (using k3b), preview it (using Xine) or edit again the structure (using QDvdAuthor).
Congratulations! You've created your first video with Kdenlive. Enjoy it and continue reading to know more about this program and its advanced features.