Preparing the media

This section describes how to transfert the downloaded files to DVD or USB disc.

Burning the Live DVD

This section describes how to burn a live DVD.

GNU/Linux

You can use GnomeBaker to burn the DVD:

  1. Select the 'Tools' menu, then "Burn DVD image'.
  2. Select the DVD image and Click 'OK'.
  3. In the dialog, click 'OK' to burn.

Windows

Download and install Infrarecorder, a free and open source image burning program:

  1. Insert a blank DVD in the drive and select Do nothing or Cancel if an autorun dialog pops up.
  2. Open Infra Recorder, and select the 'Actions' menu, then 'Burn image'.
  3. Select the live DVD image file you want to use, then click 'Open'.
  4. In the dialog, click 'OK'. 

MacOsX

Use Apple's Disk Utility (Disk Copy in older versions)

 

Preparing the Live USB mass-storage

This section describes how to transfer the Live image to a USB mass-storage.

Warning: do not use u3 compliant USB keys

Some new USB keys have a bootable hidden partition, called "u3", which cannot be deleted. Most Sandisk USB keys are u3 compliant. These keys will need to be erased using proprietary software to gain full access. Avoid these keys or your computer will not be able to boot the USB key. To remove use http://u3uninstall.s3.amazonaws.com/U3Uninstall.exe (Windows) or http://communities.sandisk.com/sandisk/board/message?board.id=u3&thread.... (Mac).

Warning: low quality USB keys

If you are running Windows, some USB keys may be bootable after using "HP USB disk storage format tool" to reformat the key :
http://h18000.www1.hp.com/support/files/serveroptions/us/download/23839....

Requirements

The USB mass-storage can be a USB key, a USB disc or a USB stick. Your bios should be recent enough to boot on USB media. The USB mass-storage size should be equal or larger than 2Gb.

WARNING: DURING OPERATION, YOU WILL LOOSE THE WHOLE  CONTENTS!

GNU/Linux

Plug-in your USB mass storage. Try to identify the device node. If you are not used to command lines, run gParted:

  1. In the menu 'Gparted', select 'Devices'.
  2. Select the USB mass-storage and note the device path: /dev/sdX where X is a letter.
  3. Right click on the USB mass-storage and click unmount.
  4. Quit Gparted.

Now use the dd command line utility to write the mass-storage. Make sure that you overwrite the whole device, not just the first partition of it that you normally mount, i.e. /dev/sdX instead of the more familiar /dev/sdX1. As root, enter:

dd if=$DOWNLOAD.img of=$USBDRV

where $DOWNLOAD is the image that you downloaded and $USBDRV is the device node of your USB key, in the above example /dev/sdX and not /dev/sdX1.

Windows

Download and install WinRaWrite, a free software to copy the Live image onto a Usb mass-storage.

  1. In floppy drive, select your USB mass-storage
  2. Click on Image File and select the downloaded image.
  3. Click on 'Write'. Click 'Exit' when finished.

Please note that after this step your USB mass-storage will be unreadable by Windows.

Warning: do not unplug your USB key until Windows finished data transfer. Right clic on the USB key to unmount the key. Windows should inform you that the key may be safely removed. Or your USB key may be unreadable.